• For use in hazardous areas
  • Large convection surface
  • DIN rail and screw mounting
  • Ready-to-use with strain relief
  • Maintenance free
  • Temperature class T5
Compact convection heater of temperature class T5 (212 °F / 100 °C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Part #

Item Name

Screw mounting brackets Hole spacing X

Operating voltage

Heating capacity

Rec. pre-fuse T (time-delay)

Dimensions
(D x W x H)

Weight approx.

3D & 2D CAD

N/A CREx 020 Hazardous Area Heater - DIN clip mount - 50 W, 100 W (T5) N/A N/A AC 230 V N/A 50 W N/A 0.5 A N/A 4.7 x 2.4 x 7.1" (120 x 60 x 180 mm) N/A 3.1 lbs (1.4 kg) N/A
N/A CREx 020 Hazardous Area Heater - DIN clip mount - 50 W, 100 W (T5) N/A N/A AC 120 V N/A 50 W N/A 1.0 A N/A 4.7 x 2.4 x 7.1" (120 x 60 x 180 mm) N/A 3.1 lbs (1.4 kg) N/A
N/A CREx 020 Hazardous Area Heater - Screw mounting brackets - 50 W, 100 W (T5) N/A 8.9" (225 mm) N/A AC 230 V N/A 50 W N/A 0.5 A N/A 4.7 x 2.4 x 7.1" (120 x 60 x 180 mm) N/A 3.1 lbs (1.4 kg) N/A
N/A CREx 020 Hazardous Area Heater - Screw mounting brackets - 50 W, 100 W (T5) N/A 8.9" (225 mm) N/A AC 120 V N/A 50 W N/A 1.0 A N/A 4.7 x 2.4 x 7.1" (120 x 60 x 180 mm) N/A 3.1 lbs (1.4 kg) N/A
N/A CREx 020 Hazardous Area Heater - Screw mounting brackets - 50 W, 100 W (T5) N/A 13.8" (350 mm) N/A AC 230 V N/A 100 W N/A 1.0 A N/A 6.3 x 3.2 x 11.8" (160 x 80 x 300 mm) N/A 6.2 lbs (2.8 kg) N/A
N/A CREx 020 Hazardous Area Heater - Screw mounting brackets - 50 W, 100 W (T5) N/A 13.8" (350 mm) N/A AC 120 V N/A 100 W N/A 2.0 A N/A 6.3 x 3.2 x 11.8" (160 x 80 x 300 mm) N/A 6.2 lbs (2.8 kg) N/A
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1